The DJI Mic 3 Receiver is the standalone receiver for expanding or replacing the receiver in a DJI Mic 3 wireless microphone setup. It supports multi-transmitter recording, Bluetooth 5.4, integrated timecode and up to 10 hours of operation.

• Model Number: DJI-MIC300-RX
• DJI Hardware Model: DMR03
• Dimensions: 53.85×28.69×22.00 mm (L×W×H)
• Weight: 25.1 g
• Wireless Mode: Wi-Fi: 802.11 a/b/g/n/ac/ax; SDR: Customizable
• Bluetooth Protocol: Bluetooth 5.4
• Bluetooth Operating Frequency: 2.400-2.4835 GHz
• Battery Type: Li-ion
• Battery Capacity: 275 mAh
• Battery Energy: 1.065 Wh
• Battery Voltage: 3.87 V
• Charging Specification: Max 5 V
• Charging Temperature: 5° to 45° C (41° to 113° F)
• Operating Temperature: -10° to 45° C (14° to 113° F)
• Charging Time: Approx. 50 minutes
• Operating Time: 10 hours
• Monitor Interface Output Power: Max Output Power: 20 mW@1 kHz, 32 Ω

Timecode

• Supported Frame Rate: 23.98F, 24F, 25F, 29.97F, 29.97DF, 30F, 50F, 60F
• Offset: 0.5 ppm, deviation less than 1 frame within 24 hours
• Input: LTC
• Input Port: 3.5mm TRS
• Input Voltage: Not greater than +6 dBu
• Output: LTC, Audio-TC
• Output Port: 3.5mm TRS, USB-C
• Output Voltage: 0.5 Vp-p

• A standalone receiver allows an existing DJI Mic 3 system to be expanded or a receiver to be replaced without purchasing another complete kit.
• Support for multiple transmitters makes the DJI Mic 3 Receiver useful for interviews, group recording and larger production setups.
• Integrated timecode gives creators a dedicated synchronization tool and the receiver can also be used independently as a timecode generator.